[Computer Chassis] ROG Strix Helioses right/ left Plastic feet disassembly and assembly precautions

Notice
1. Kindly wear gloves to protect your hands before proceeding with disassembly or assembly. Pay special attention to the corners of the parts to avoid any scratches.
2. When the side panel or front panel is made of glass, please handle it with extreme care during disassembly to avoid any collisions, falls, or undue stress.
3. When disassembling, please lay the casing flat on a stable surface to prevent the side panel from falling during the process.
4. Kindly ensure that the relevant wires are neatly arranged during assembly to prevent any damage to the wires throughout the process. 
5. Keep track of all screws and small components during disassembly and assembly to avoid losing any parts.

 

Tools required
Phillips screwdriver PH2

1. Remove the glass panels on both sides.

2. Open the cable cover and lift up to remove.

3. Remove Power cover
    3-1 Remove 2 screws on the left side.

    3-2 Remove the 3 screws on the right side.

4. Remove the 4 base screws on the left side.

5. Remove the 4 base screws on the right side.

6. Remove the 4 screws on the bottom of the chassis.

7. When removing the left and right bases, squeeze the front and rear latches on the bases.
    left side

    right side

8. Removal of left and right-side Plastic feet completed.